Licensed Sydney Water Jetting Specialists
High Pressure Water Jetter
We blast out grease, sludge and tree roots, then prove it on camera.
When a drain keeps blocking after every clean, the pipe is usually packed with grease, sludge, or tree roots that a plunger or a bottle of chemical will never shift. Our high pressure water jetter scours the full inside of the pipe and flushes the blockage right out, so the drain runs properly again.
Book Now
Clear the cause, not just the surface
Stop clearing the same drain over and over
Water jet drain cleaning targets what a snake or a bottle of chemical cannot reach: the hardened grease, sludge, and root matter coating the full inside wall of the pipe.
High pressure water jetting, sometimes called hydro jetting, sends a controlled jet of water through a specialised nozzle that scours the pipe wall and washes the debris away with it. It is the drain cleaning method Sydney households, strata managers, and businesses call when a plumber has cleared the drain before but it keeps coming straight back. If you want to understand why jetting beats a chemical on baked-on fat, our guide on hydro jetting for grease build-up walks through it.
The process
How Does High Pressure Water Jetting Work?
Every high pressure water jetting job follows the same four steps, so you always know what is happening inside your pipes.
Built for the stubborn stuff
What a High Pressure Water Jetter Clears
A high pressure water jetter machine handles the blockages that beat a plunger, a chemical, or a hand-fed snake, cleaning the full pipe wall rather than punching a small hole through the middle.
Where the camera shows the blockage keeps coming back because of heavy root intrusion, jetting clears it now and we can talk you through our tree root damage service for a longer-term answer.
Not every blockage needs a jetter
If the camera shows a cracked or collapsed pipe rather than a build-up, cleaning alone will not hold. In that case we will say so and point you to pipe relining or pipe replacement instead. No upsell, just the honest call.
Water jet solutions
Water Jet Solutions for Sydney Drains
We provide water jet solutions across residential, commercial, and strata drainage, from a single blocked kitchen line to a full site of sewer and stormwater drains.
Sewer lines
Our sewer water jetter handles sewer drain jetting where waste, wet wipes, and roots keep choking the line and a snake only buys a few weeks.
Stormwater drains
Stormwater drain jetting clears leaves, silt, and mud from pits and pipes before the next heavy Sydney downpour backs them up.
Kitchen and bathroom
Grease-packed kitchen waste pipes and slow, smelly bathroom and laundry drains, cleared back to full flow.
For a business or unit block, our commercial drain jetting can be scheduled around trading hours, and larger sites are handled with the same jet blaster equipment. If you would rather hand the whole site over, see our commercial drain cleaning service. And if you have been searching for water jet drain cleaning near me, or for water jetting Sydney and hydro jetting Sydney more broadly, we cover homes, strata, and businesses right across the city.
Straight advice
Water Jetting vs Electric Eel and Chemicals
High pressure water jetting, an electric eel, and drain chemicals all have their place. Here is when each one is the right call for your drain.
When water jetting wins
When another method fits
High pressure water jetting is also known as water blasting or hydro jetting. Whatever you call it, the camera tells us which method your drain actually needs, and we tell you straight.
A licensed drainer, not a hire machine
A hired jetter in untrained hands can pack a blockage harder or damage an already weak pipe. We turn up with the commercial-grade gear, the right nozzles, and a licensed drainer who camera-checks first, so the pressure goes where it should.
Honest pricing
High Pressure Water Jetting Cost in Sydney
Every jetting quote is confirmed after we have seen the blockage on camera, never guessed blind over the phone, because the pipe is the only thing that tells us the real scope.
Pipe size and length
A long run or a large-diameter line takes more time and a bigger nozzle.
Blockage type
Light grease clears faster than compacted sludge or a root mass.
Root severity
Heavy root intrusion needs a cutting nozzle and more passes.
Access
How easily we can reach a suitable access point on the drain.
Number of drains
One kitchen line versus a whole site of sewer and stormwater drains.
What is included
$0 call-out, and you approve the fixed quote before any jetting starts.
Because every drain is different, we do not publish a one-size price. What we do promise is a clear, itemised quote after the inspection. You can confirm you are dealing with a licensed drainer through the NSW Fair Trading plumbers and drainers guidance before any work starts. And because stormwater lines discharge to local creeks and waterways, we keep flushed debris out of the system in line with NSW EPA stormwater guidance.
Answers, straight up
High Pressure Water Jetting FAQs
High pressure water jetting pushes water through a specialised nozzle at high pressure. The jets scour grease, sludge, scale, and roots off the full inside wall of the pipe and flush the debris downstream, clearing the whole diameter rather than punching a small hole through the blockage. We camera-check the pipe first, then match the nozzle and pressure to the job.
A high pressure water jetter clears grease and fat, sludge and sediment, soap and scale, food waste, general debris, and light to moderate tree roots. It is built for build-up that coats the pipe wall, which is exactly what a plunger, a chemical, or a hand-fed snake tends to leave behind.
Yes, jetting cuts back fine feeder roots and light to moderate root intrusion and flushes them out. If the camera shows roots keep returning through cracks and joints, that points to pipe damage, and we will talk you through longer-term options like tree root treatment or pipe relining rather than just clearing it again.
For a pipe in sound condition, yes. That is why we run a CCTV inspection first and set the pressure and nozzle to suit the pipe material and size. If the camera shows the pipe is already cracked or collapsed, we will not jet it and hope, we will recommend relining or replacement instead.
The cost depends on the pipe size and length, the type and severity of the blockage, root intrusion, access, and how many drains are involved. We confirm your price with a fixed quote after the CCTV inspection, with a $0 call-out and no jetting until you approve.
An electric eel is good for punching through a single solid blockage in a short line. High pressure water jetting is better when grease, sludge, or roots coat the whole pipe, when the line keeps blocking, or when you want the full diameter cleared and flushed out. The camera makes the call obvious, and we recommend whichever actually suits your drain.
For a home, only when a drain is slowing or blocking. For a busy kitchen, cafe, or a strata site with a history of grease or roots, many owners schedule preventive jetting every 6 to 12 months to stay ahead of blockages. We can suggest a sensible interval once we have seen how quickly your line loads up.
Yes. Hydro jetting, water jetting, water blasting, and drain jetting are all common names for the same method: clearing a drain with high pressure water. Whichever term you have seen, it is the service on this page.
Yes, on every job. A quick CCTV inspection tells us what the blockage is, whether the pipe can safely take jetting, and rules out a collapse before we start. It also means we can show you the cleared pipe on camera afterwards, so you can see the result rather than take our word for it.
Book a high pressure water jetter and clear it for good
Tell us what your drain is doing. We will camera-check the pipe, jet out the blockage, and show you the cleared line before we leave.
